Echipamente Auxiliare

Drying Oven

Across a large range of industries and research laboratories, drying ovens are useful for both simple applications (glassware drying/sterilization) and more complex processes which require controlled conditions (bonding and curing).

• Chamber capacity: 56 L
• Temperature range: up to 300°C
• Temperature resolution: 0.1°C

Calcining oven

Calcination, also known as calcining, represents the thermal treatment of solid samples in ambient air or oxygen atmosphere, usually at temperatures lower than their melting point. As a result, the following processes may take place within the interest sample:

• Thermal decomposition
• Phase transition
• Volatile fraction removal

Tabletop Centrifuge

• High performance
• Built-in 8-place rotor
• Compact
• capacity: 8x15ml
• Max RPM: 8000

 

Pharmaceutical Refrigerator

The pharmaceutical refrigerator MPR-S313-PE from Panasonic, equipped with an advanced cooling technology provides a compact solution, yet enabling a large storage capacity for pharmaceutical, biological, chemical and medical supplies.

• Effective
• Reliable temperature control
• Quiet operation
• Ergonomic design
• Effective capacity: 340L
• 5 wire shelves
• load/shelf: 20 Kg

 

Spin Coater

• Versatile
• High quality
• All plastic
• R&D and low volume production deposition
• Suitable for all typical spin processes: cleaning, rinse/dry, coating, developing and etching.
• Sample size: 5 mm up to Ø 150 mm

Typical Applications:

• MEMS
• Semiconductor
• PV
• Microfluidics field

Probe-type Ultrasonic Homogenizer

The ultrasonic probe device can be used for open beaker applications or in continuous processing using a closed flow-through mode. Using a sonicator probe instead of an ultrasound bath, the intense sonication zone is focused directly beneath the probe. The sonicator probe outperforms the standard ultrasound bath by a factor of 1000.

Ultrasonic Bath

• Temperature range: from ambient +5°C up to 80°C
• Working frequency 35 Khz

The following are some of the desired effects of the ultrasonication of liquid samples which can optimize the sample preparation process:

• Disintegration
• Sonochemical effects
• Homogenization
• Dispersion
• Deagglomeration
• Milling
• Emulsification
• Extraction
• Lysis

 

Analytical balance

• High-quality single-cell weighing system
• Stable temperature behavior
• Weighing space WxDxH 174x162x227 mm
• Max weighing range: 80 g
• Read-out: 0.1 g
• Min reproducibility: 0.2 g

Chemical Hood

• Highest possible operator protection during the potentially dangerous material processing
• Double back wall for aspiration
• An upper air inlet and an air inlet on the top provide for a rapid gas removal
• Designed to prevent vortexes
• Safety burst-proof system
• Cabinets for acids/bases and inflammable products

Water Bath

• volume up to 6L
• up to 100°C
• LCD display
• incl. dome stainless steel flat lid

Centrifuge

• speed: 100 – 5000rpm
• Max. RCF 4980g
• Timer: 1′ – 1h 59′ 59″
• Noise <65dB

AFM Workshop

Precision Cutter

• Simple to operate, gravity fed membrane panel controls
• Rotating vise for larger samples
• Optional table saw attachement
• 0.17Hp motor

Hydraulic Press

 

DSP Lock-In Amplifier

Lock-in amplifiers are useful tools for the detection and measurement of very small AC signals, even as small as a few nanovolts. The amplifier allows accurate measurements even for small signals usually obscured by noise sources many thousands of times larger. Using phase-sensitive detection, a signal with a specific reference frequency and phase can be singled out and recorded. The noise signal with different frequency than the one used as reference is rejected and does not interfere with the measurement.

Digital LCR Meter

Protek 9216A represent a valuable tool for measuring device characteristics.

• Various functions
• Basic accuracy of 0.05%
• 5 test frequencies
• 13 orders of magnitude
• Up to 9 setups can be stored in the memory
• Remote over RS-232C and GPIB/Handler(Option) Interface

Multiple-position hot plate stirrer with four separately controlled stirring plates

• Maximum temperature 370 °C
• Up to 4x15L flasks
• Coated Al alloy heating plate
• Excellent chemical resistance
• Up to 1500 rpm
• 4 independent heating stirrers
• Up to 155 mm diameter flasks

Picoscope

• 20 GHz sampling oscilloscope with TDR, CDR and optical option
• Microwave bandwidth and femtosecond timing without high cost
• 2 or 4 channels
• 1 MS/s sample rate to 32 kS store
• 64 fs, 15 THz effective sample rate
• 14 GHz prescaled and 2.5 GHz direct trigger
• Pattern sync trigger of length 7 to 2²³–1
• 8 ps typical RMS jitter
• 16 bit ADC resolution